Marketing Chemicals Immersion Strip-It is an extremely heavy duty non-flammable liquid paint stripper designed for use in a dip bath operation.
The product is formulated to give efficient stripping of modern organic coatings including most baked or powder coatings.
Clear to amber liquid.
Removal of paint, epoxy, powder coating and other tenacious coating from steel articles.
Fill mild steel tank with Immersion Strip-It.
Add a water seal of not more than 25% of bath volume to stop solvent evaporation.
Do not immerse articles for longer than 4 hours, periodically checking for degree of stripping.
When stripping is complete, take the articles out slowly, allow to drain over the tank and hose off with a strong jet of water.
Follow up by paint pre-treatment and/or painting system.
Marketing Chemicals Ltd. Brush On Strip-It is a Gel formulation, designed to provide aggressive & fast acting removal of most paints & powder coatings.
Formulation is effective on Acrylics, Enamels, Two Pot Epoxies, Urethanes, Baked on Coatings, Road Markings & Anti Fouling Marine paints.
WEAR IMPERVIOUS GLOVES & EYE PROTECTION WHEN USING THIS PRODUCT
KEEP OUT OF THE REACH OF CHILDREN
Important: as we have no control over where this product is used, where it is applied or how it will react, no warranty is expressed or implied as to the results obtained.
The seller, distributor or manufacturer shall not be liable for any injury direct or consequential, arising out of how the product is used.
Here at Marketing Chemicals Ltd we aim to "Deliver the best quality at the best price", because we blend products to our own formulations, we can even tailor make products for customers to ensure they get what they need.
Ph: (09) 634 3862
Fax: (09) 634 3864
Address: 2 Rymer Place, Mangere Bridge, Auckland.